ONE TASK, MANY SOLUTIONS!

HAL Cemco Quicksilver for pcb production

Number: 17009

HAL Cemco Quicksilver. Equipment is in excellent condition, fully functional and ready for shipment from our warehouse in Russia.


YOM 2005

Specifications

MODEL: FPO8-GA-09R MANUF’R DATE: 19/08/96,
DESCRIPTION: ENCLOSED 30″QUICKSILVER WITH 5°TIPS
SERIAL No: WO 026926 / JN 007209

LENGTH: 1350 mm
WIDTH: 1730 mm
HEIGHT: 2978 mm
WEIGHT: 925 Kilo
ELECT. CIRC: CD996

PNEUMATIC CIRC: PN1012
MAX. SINGLE LOAD: 7.5 Amps
SHORT CIRC. PROTECT: 10,000 AMPS

ELECTRICAL:

1) CABLE: 4-WIRE
2) VOLT: 400V, PHASE: 3
3) FREQ: 50 HZ NEUTRAL: NO EARTH: YES
THIS EQUIPMENT MUST BE GROUNDED

FULL LOAD CURRENT: 50Amps
AIR SUPPLY:

60 CFM [1700 1/Min]
AT 100 PSI [6.5 Bar]

AIR HOLDING TANK: 15 Cubic ft [425 litres]
EXTRACTION: 45 Cubic Metres/Min. AT 76 mm WG,

MAX.SIZE: 610 X 762 mm
MIN.SIZE: 254 X 150 mm with 2-pin fixture,
50 x 50 mm with clamp-arm assembly.

THICKNESS: 0,8 – 3.2 mm (as standard)
FEED RATE: Minimum 6 Seconds subject to panel size.

SOLDER FILL: 300 KG [660 lbs] APPROX.
HEATERS: DIP.ZONE: 2.5 KW
PUMP ZONE: 3.0 KW A/KNIFE: 3.0 KW

POWER: 12 KWhr Typical but dependant upon
Production Duty cycle
AIR: 0.5 – 1.7 Cu.M/min Typical but dependant upon Production Duty cycle.
FLUX: 25 Litres per 140sq metre approx subject to flux applicator settings.

HEAT: APPROX 950 WATTS Subject to production duty cycle
NOISE:

EQUIV.CONTINUOUS ‘A’: 75 dB
{ If over 70dB(A) }

PEAK ‘C! SOUND PRESSURE VALUE: N/A
{ If above 130 dB(C) }

SOUND POWER LEVEL: N/A
[If ‘1/.’ exceeds 85 dB(A) ]

Price on request.

Similar pages: