ONE TASK, MANY SOLUTIONS!

Raster flatbed photoplotter MIVA2612 for pcb production

Number: 202336

A versatile photoplotter with a large work area and a table on a granite base. Year of release – 2012. Status of the new installation.

Features

Resolution (standard) 3000/6000/12000 dpi

Accuracy ± 9 microns

Reproducibility ± 4 microns

Power 1.0 kW

Dimensions (mm) 1465 x 1250 x 1650 (height)

Weight (kg) ~ 800

Working area 660 x 762 mm

Speed ​​of production of f / w size 457х610 mm:

3 minutes at 3000 dpi

6 minutes – 6000 dpi

12 minutes – at 12000 dpi

Input data format GERBER RS274 / D, GERBER RS274 / X, HP-GL…

Compressed air (built-in compressor) 60 l / min. @ 2 atm.

Power supply ~ 220 V. / 50 Hz.

+ neutral + ground

Package contents:

– Automatic film loading / unloading device (up to 100 sheets)

The loader fits between the developer opening and the back of the plotter, has a pair of cassettes for different film sizes, one of which can be used as a storage device for exposed films.

– Uninterruptible Power Supply (UPS Back up, 1500 VA).

– Photoplotter control unit (Intel-Pentium based system unit).

Setting for developing photomasks “EG900PCB” by Echo Graphic ApS

Development setup characteristics

Productivity 64 cm / min. with a development time of 30 seconds

Time for processing a photomask: 120 sec. with a development time of 30 seconds.

The size of the processed photographic film:

width: 10 – 91 cm

length: minimum 18 cm, max. 5 m

Development time: 20 – 80 sec.

Bath capacity: 29 liters

Water consumption (max.): 3.5 l / min

Unit dimensions: 1230 x 1840 x 1100

Weight (without solutions / with solutions): 300/420 kg

Power supply: 220V, 50/60 Hz < / p>

Power consumption (nominal / max.): 5.0 / 5.9 kW

Similar pages: